SharePoint 2010/2013 Single-Multi Server Installation using AutoSPInstaller

What you expect?

  • How to install SharePoint 2010/2013 single-multiple servers using AutoSPInstaller?
  • Which Service Accounts are used and why they are needed for SharePoint Server and SQL Server Installation & configuration?
  • What should we take care while Configuration of AutoSPInstallerGUI?
  • You can get base architecture knowledge on which SharePoint works and why each configuration is needed for SharePoint Installation?

Recently I have installed the SharePoint Server 2013 on multiple servers. First I will define my Environment. So it’s helpful for understanding the Server’s Architecture.

I have two application servers, two web front end servers and one database server

Server Architecture:

Server Name Description
SPAPP1 Application Server 1
SPAPP2 Application Search Server
SPWEB1 SharePoint Web Front End 1
SPWEB2 SharePoint Web Front End 2
SQLDB SQL Server

Three-tier farm configuration

  • You can add web servers (SPWEB1, SPWEB2) to the web tier. These servers can be configured as conventional web servers to handle user requests, or they can be configured to host dedicated query components or other service components.
  • You can add application servers (SPAPP1, SPAPP2) to the application tier and configure them as dedicated servers that will host the SharePoint Central Administration website or other services on the farm that require dedicated resources or isolation from the web tier — for example, crawl components, query components, and profile pages.
  • You can add database servers to the database tier (SQL) to implement a stand-alone instance, database mirroring, or a failover cluster. To configure the farm for high availability, database mirroring or a failover cluster is required on the database tier.

SharePoint Service Accounts

Why we need Service Accounts while installing and configuring the SQL Server and SharePoint Server?

If the Service Accounts cannot configure properly while SharePoint Installation and configuration then they can open big security problems. So need to set up the accounts as per the security risk.

By giving fewer rights to each account, you limit the possible damage in case an account gets hacked and also follow Microsoft’s recommendation of installing SharePoint 2013 with least-privilege administration

I have used below two service accounts SQL_Admin and SQL_Service for SQL Server and 10 SharePoint Service Accounts for SharePoint Setup, Farm Administrator, Web Application Pool, Service Application Pool, My Site Application Pool, Crawl and Search Service accounts, User Profile account, Cache Object accounts

For the SQL Server

Name Description Local Rights Domain Rights
SQL_Admin SQL Admin on the SQL Server. Used to Install the SQL Server. Local Administrator on the SQL Server Domain User
SQL_Services It is the service account for the following SQL Server services: MSSQLSERVER SQLSERVERAGENT. None Domain User

First I have installed SQL Server 2012 R2 on SQLDB server.

After completing the SQL Server installation, you need to set up SQL Server Alias for SQL Server for Remote access. So we can directly connect to SQL Server using the given alias name instead of the SQL Server Instance name.

I have already written blog on how to configure SQL Server Alias and you can get over it from: https://codecreature.wordpress.com/2014/08/11/create-and-configure-sql-server-instance-and-alias-for-sharepoint-installation/

Here I have created SQL Server Alias named “DevDB”.

Now it’s time for creating the SharePoint Service Accounts

SharePoint 2013 Service Accounts Practice

Name Description Local Rights Domain Rights
SP_Install The server farm account is used to perform the following tasks:

  • Seup
  • SharePoint Products Configuration Wizard
Local Administrator on all the SharePoint Servers. SecurityAdmin and DB_Creator rights on the SQL Instance Domain User
SP_Farm The server farm account is used to perform the following tasks:

  • Configure and manage the server farm.
  • Act as the application pool identity for the SharePoint Central Administration Web site.
  • Run the Microsoft SharePoint Foundation Workflow Timer Service.
SecurityAdmin and DB_Creator rights on the SQL Instance Domain User
SP_Portal The SP_Portal account is used to run the Web Application Pools. None Domain User
SP_MySite The SP_MySite account is used to run the MySite application Pool None Domain User
SP_Services The Services Account is used to run the Service Application Pool None Domain User
SP_Crawl The Default Content Access Account for the Search Service Application None Domain User
SP_Search Service Account to run the SharePoint Search “Windows Service” None Domain User
SP_UserProfiles The User Profile Synchronization Account None Replicate Directory Changes permission on the domain.
SP_CacheAdmin Web application Policy Full Control. So items can be cached by ASP.Net to improve the performance None Domain User
SP_ CacheReader Web application Policy Read Control. So items can be cached by ASP.Net to improve the performance None Domain User

Replicating Directory Changes permission to the Profile Service account
For configuring the replicating directory changes permission to profile service account: http://technet.microsoft.com/en-us/library/hh296982.aspx

AutoSPInstaller and AutoSPInstallerGUI
AutoSPInstaller is an open source set of PowerShell scripts that installs and performs a base configuration of SharePoint Server 2010 or 2013. These scripts were originally authored by Brian Lalancette and Andrew Woodward as well as other community contributors.  It configures a single or multi-server SharePoint farm based on a predefined configuration XML file.

Download link for AutoSPInstaller: http://autospinstaller.codeplex.com/releases/view/38568

For Multi-Server deployment, Provides the Sharing access on extracted folders of AutoSPInstaller. So all other SharePoint Servers can access it while installation.

Files Structure inside AutoSPInstaller Extracted Folder

AutoSPInstaller Structure

AutoSPInstaller Structure

AutoSPInstaller can be run either in

  • Offline Mode: In Offline mode you need Prerequisites files
  • Online Mode: In Online mode, it will automatically download Prerequisites files from internet.

SharePoint 2010 Media

  • Download SharePoint 2010 Prerequisites – Here is the download link for SharePoint 2010 Prerequisites
  • After Completing the download of prerequisites, put prerequisites files inside PrerequisitesInstallerFiles Folder(SP->2010->SharePoint->PrerequisitesInstallerFiles)
  • (SP->2010->SharePoint.
  • Then Open your SharePoint 2010 installation media and copy it to SharePoint Folder.

SharePoint 2013 Media

  • Download SharePoint 2013 Prerequisites
  • After Completing the download of prerequisites, put prerequisites files insidePrerequisitesInstallerFiles (SP->2013->SharePoint->PrerequisitesInstallerFiles)
  • Then Open your SharePoint 2013 installation media and copy it to SharePoint Folder. (SP->2013->SharePoint)

Why we to use AutoSPInstaller?
PowerShell is recommending for the below reasons:

  • Streamlined Deployment
  • Reduce Human Error
  • Generate Farm Configuration Documentation and
  • Repeatable procedures for deploying staging and development environments to mirror production.

Why we to use AutoSPInstallerGUI?
AutoSPInstaller’s configuration required very high knowledge of the PowerShell, SharePoint Architecture, Active Directory and most important accuracy. Because it only contains the PowerShell Script. But if you know basic level of SharePoint Structure, then by using the AutoSPInstallerGUI, it is possible to configure the single server/multiple servers SharePoint Installation.

AutoSPInstallerGUI is a Windows application that helps you build this configuration XML file with useful tooltips, tabular GUI, and error checking on your inputs.  AutoSPInstallerGUI is built and maintained by Ivan Josipovic.  Both of these projects are hosted on Codeplex and are free to use.
Download link for AutoSPInstallerGUI: http://autospinstallergui.codeplex.com/

Extract both file and put it in right place.
Note: If you get the following issue with AutoSPInstallerGUI opening:

.NET FremeWork 3.5 Feature Error

.NET FremeWork 3.5 Feature Error

Then you just have to enable .NET Framework 3.5 in just current server where AutoSPInstaller is running.

You can enable the .NET Framework 3.5 yourself through Control Panel. In Control Panel, choose Programs and Features, choose Turn Windows features on or off, and then select the .NET Framework 3.5 (includes .NET 2.0 and 3.0) check box. You can also select option child option as per your requirements

Enable .NET FrameWork 3.5

Enable .NET FrameWork 3.5

Restart the Server.

For Executing the Script Unattended we have to take care of below steps for all the SharePoint Servers listed as above:
Prepare for Unattended SharePoint Install

You have to perform below settings on all the SharePoint Servers (SPWEB1, SPWEB2,SPAPP1,SPAPP2) for Unattended SharePoint Install.

  • Open Run (Press Windows + R) by type “msconfig”
Windows MSConfig

Windows MSConfig

  • Select Tools” tab and Launch “Change UAC Settings”.
Change UAC Settings

Change UAC Settings

  • Scroll to the “Never Notify” and press OK”
User Account Control Settings

User Account Control Settings

Turn off warning on file open

  • Open Run (Press Windows + R) by type “gpedit.msc”
  • Redirect To : User Configuration => Administrative Templates=> Windows Components=> Attachment Manager=> Inclusion list for low file types=> add ”exe;” to the list.
Change Registry Settings

Change Registry Settings

Inclusion of .EXE file

Inclusion of .EXE file

Enable For Low Type File

Enable For Low Type File

  • Restart the SharePoint Server

AutoSPInstallerGUI Configuration

Configure the AutoSPInstaller XML file using the AutoSPInstallerGUI as below and run the AutoSPInstaller .bat file on the SharePoint Application Server (SPAPP1). You only have to run the AutoSPInstaller script from a single server. It will go out and run itself on all other servers in your farm. The first server will install itself, create the farm and the service applications and in the end connect to the other servers.

Currently I am logged in with “SP_Install” account on “SPAPP1” application server (which is local admin on all SharePoint Server and also has SQL Server Permission with DBCreate and  and SecurityAdmin).

Note: Use server name (i.e. SPAPP1) instead of the localhost.

Single Server Install: If you want to install service on single server, then just specify the server name (i.e. SPWEB1)

Multi Servers Install: If you want to install service on multiple servers, then specify the comma separated server names (i.e. SPWEB1,SPWEB2) as below shown.

Step 1:

AutoSPInstaller Install

AutoSPInstaller Install

SharePoint Version SharePoint version which you will going to install
Offline Install If enabled, SharePoint prerequisite will be installed from SharePoint\SharePointPrerequisite FolderIf disable, SharePoint prerequisite will be downloaded during install. Don’t need to put prerequisite in SharePoint\SharePointPrerequisite Folder. Just enable the internet.
Pause After Install It’s useful for multiple remote server installation. The script will pause after SharePoint binaries are installed.
Remote Install For multiple remote server installation. There are two options:
Enable: Script will know, its remote install and configure the farm for multiple remote servers
Parallel Install: Override the “Pause After Install” option and install SharePoint binaries on multiple remote servers simultaneously to speed up the things.
Auto Admin Logon For automatic log on using SharePoint install account at server restart while SharePoint binaries Installation.
Disable Check all the options for smooth execution. Which disable network loopback check, disable unused services while installation.
Unattended Install Config File: Create automatically if not specified, contains configuration used while installation.
Install Dir: define the place of SharePoint Server program files, It doesn’t have connection with 14/15 hive. By default, Install Dir is /%ProgramFiles% Microsoft Office Servers/
Data Dir: define the place for SharePoint 14/15 hive.
PID Key: SharePoint Server Product ID Key.

Step 2:

AutoSPInstaller Farm Main

AutoSPInstaller Farm Main

AutoSPInstaller SharePoint Managed Acoounts

AutoSPInstaller SharePoint Managed Acoounts

Passphrase To join additional server to the farm and used in secure token service application
Farm Account Add To Local Admins During Setup: Add farm account to local admin group of servers and required for UPS Application.
Leave In Local Admins: leave farm account from admin group if enabled
Username Password: Farm account credentials
Database DB Server: Database Server where SharePoint Config Database will resides. Its better to pre configure the Alias for the DB server instance and you just need to specify the alias name. To create SQL Server Alias follow: Create SQL Server Alias
Create Alias: don’t need to create alias if you have configured alias already as in DB server.
DB Prefix: “DB Prefix” is perpended to all database name which are created during SharePoint Installation. I have used “SP”. So SharePoint “config “database named as “SP_Config”
Config DB: Farm configuration database. Database is Named as “SP_Config” in DB Server
Central Administrator Provision: Which on which host the Central Administrator Web Application. Preferred, Application server (“SPAAP1”) is used to host the central admin or you can say that where the CA is configured that server is called as application server in SharePoint multi servers.
DB Name: Central Admin web application database.”Content_Admin” becomes “SP_Content_Admin” in database server “DevDB”
Port: Port number on which CA will run.
Use SSL: Automatically create SSL certification if SSL enable.
Managed Accounts Managed Accounts: A Managed Account is effectively an Active Directory user account whose credentials are managed by and contained within SharePoint.I have configured below Managed accounts from the above SharePoint Service Account
Domain\SP_Service: For most of the SharePoint Service except Search Service
Domain\SP_Portal: Application pool account for web application 1
Domain\SP_MySite: Application pool account for my site web application
Domain\SP_Search: used by search service
Object Cache Accounts Super User: Web application Policy Full Control. So items can be cached by ASP.Net to improve the performance (SP_CacheAdmin)
Super Reader: Web application Policy Read Control. So items can be cached by ASP.Net to improve the performance (SP_ CacheReader)

Step 3:

AutoSPInstaller Services

AutoSPInstaller Services

Sandboxed Code On which server, Sandbox service will run, false means do not need to host.Same for the Claim To Windows Token and SMTP Service.If you want to configure then provide the server nameI am hosting the SMTP Service on application server(SPAPP1)
Outgoing Email Enable to configure the outgoing SMTP setting for Farm
Incoming mail Provide same server on which SMTP service is running(SPAPP1)
Distributed Cache Provides distributed cache on server. Web Front End Servers are preferred.So I have given my two WFEs as (SPWEB1,SPWEB2)
Workflow Timer Host Workflow Time Service. Provide the app server name(SPAPP1)
Web Application Host SharePoint Web application on web front end. For multiple WFEs, provide comma separated name as SPWEB1,SPWEB2

Step 4:

AutoSPInstaller Farm Logging

AutoSPInstaller Farm Logging

IIS Logs You can provide the separate log location instead of the 14/15 hive folder. I have given the separate folders for logs in D: drive.In addition, also specify the log disk usage in GB and how many days to keep logs interval in days
ULS Logs
Usage Logs

Step 5:

AutoSPInstaller Portal Web Application

AutoSPInstaller Portal Web Application

AutoSPInstaller MySite Web Application

AutoSPInstaller MySite Web Application

Add URL to HOSTS If you have not configured the DNS for Web Application URL, then enabled flag will all add Alternative Access Mapping URL to the Local server’s host file
WebApplications By default its provide two, web applications. Portal and MySite. We also have the add/remove options to add more or remove Web Application. But there is one limitation is that we must have to create/configure one Web Application either Portal or MySite.I have added two Web Applications: Portal and MySite
Type Web Application Type, you can use Portal or MySiteHost as per the Application.One Web Application should have this type at a time.
Name Web Application Name
App Pool Name Application Pool Name under which the Web Application will run.
URL Web Application Host Header. All Site Collection will begin with this name and please choose http:// or htttps:// carefully. Do not add port number. It’s below.
Port Port Number of Web Application
Database Server Provide the SQL Server or Alias Name as configured above. By default it will take farm database server.
Database Name Content Database Name for the Web Application.
Database Alias If you have already configured the SQL Server Alias then it’s not need to configure
Use Host Header If Checked, then web app URL will be placed in IIS Bindings. If you configure the same host named site collection (http://SharePoint), then do not need to enable.
Add URL To Local Intranet Zone If checked, then while browsing the web app, it will not ask credentials.
  Grant Current User Full Control: Provides current user all control on web app.
  Use Claims Authentication: Enable Claims Authentication
  Use Basic Authentication: Enable Basic Authentication
Managed Paths Allows to create addition managed path and url
Site Collection We can add/remove multiple site collections per web application using this GUI.
  Site URL: Site collection URL. Don’t include the port number
  Host Named Site Collection: Enable to create Host named site collection.
  Owner: Site Collection Owner Account. It’s required. Otherwise script will fail.
  Name, Description: Provide the name means Title and Description
  DBName: Content DB of site collection, IF not specified then, it will use Web App Content DB by defaultSearch URL: Search center URL.
  Custom Template: we can choose custom web template for the root web for site collection. Currently I have selected Team Site Template.

Step 6: Configured the Search Service Application on Separate Application Server (SPAPP2) and All Other Services are on other Application Server (SPAPP1).

AutoSPInstaller Search Service Instance

AutoSPInstaller Search Service Instance

AutoSPInstaller Search Service Application

AutoSPInstaller Search Service Application

Search Service Instance Provision: Server Name, On which the Search Service Instance is created. I have used separate application server which host the Service Application (SPAPP2)
  Connection Timeout: In Seconds, wait to crawl contents, links. So please assign value carefully. Not too high, not too low. 60 seconds are recommended.
Acknowledgement Timeout: how long wait for request ack.
  Contact Email: For contact content admin if crawl error or performance error occurs.
Search Service Application Name –Proxy of Search Service Application
  Content Account and Content Acc Password: This account is used for Content Crawling.
  Search Center URL: Default search center URL for all site collections.
  Database Name, Database Sever: Search Service Database Name and DB Host Server Name (Alias Name).
  Application Pool Name and Admin Component App Pool Name: Application pool name under which search service will run.
  Search Topology: Provide the server names for proper distribution of search service. I have configured the separate Application Server for Search Service

Step 7: All Other Services except Search Service are hosted on Application Server (SPAPP1)

AutoSPInstaller UPS

AutoSPInstaller UPS

UPS User Profile Service also need the Provision server name, Service Name, Proxy Name, Content DB names for Profile, Sync and Sync and Database Server name as configured in Search Service.
  Sync Account: This account name is same name which we have used in replication Active Directory Change configuration for providing the synchronization between AD and SharePoint User profile accounts.I have used Domain\SP_UserProfilesAlso check the
Start Profile Sync and Create Default Sync Connection for starting the service and creating the sync connection between AD and SharePoint Servers.

Step 8:

AutoSPInstaller BDC Service

AutoSPInstaller BDC Service

AutoSPInstaller App Management

AutoSPInstaller App Management

AutoSPInstaller MMS

AutoSPInstaller MMS

BDC, MMS and App Management Services Service need the Provision server name, Service Name, Proxy Name, Content DB names for Profile, Sync and Sync and Database Server name as configured in Search Service and UPS.Now all other services have the same configuration as above.

Step 9:

AutoSPInstaller Performance Point Service

AutoSPInstaller Performance Point Service

You can configure the five Enterprise Service Applications of Excel, Visio, Access 2010, Access 2013 and PerformancePoint Service by provide the Host Server and Database name, Service Account Name like below displayed the Performance Point Service Configuration.

Execute the Configured AutoSPInstaller XML using PowerShell

After completing the AutoSPInstaller configuration, You can save as XML file as “DevAutoSPInstaller.xml” in the AutoSPInstaller folder as shown in figure.

I have taken the different name, because I can use the actual “AutoSPInstallerInput.xml” file for reference.
Before running the AutoSPInstaller PowerShell, Please make sure that you logged with with “SP_Install”(which is local admin on all SharePoint Server and also has SQL Server Permission with DBCreate and  and SecurityAdmin ) account in your server.
Currently I am logged in with “SP_Install” account on “SPAPP1” application server.
Now, Drag the new XML file “DevAutoSPInstaller.xml” into the AutoSPInstallerLaunch.bat.

If you directly run “AutoSPInstallerLaunch” bat file, by default it will use “AutoSPInstallerInput.xml”. So take care while running the bat file.

 

Stay Connected…

Thank you…

 

Advertisements

20 thoughts on “SharePoint 2010/2013 Single-Multi Server Installation using AutoSPInstaller

  1. I get this error
    ————————————————– ————
    ————————————————– ————
    – Managed Metadata Service Application Provisioning
    – Starting Managed Metadata Service:
    – Managed Metadata Service Already started.
    – Managed Metadata Service Application Already provisioned.
    – Managed Metadata Service Application Proxy Already provisioned.
    – Granting rights to Metadata Service Application:
    – COOPEDUC \ SP_Services …
    Grant-SPObjectSecurity: The Rights argument is invalid. Valid values ​​are: Read access to store
    speaking, reading and access restricted to writing term store, Full Access to Term Store
    In C: \ SP \ AutoSPInstaller \ AutoSPInstallerFunctions.ps1: 2386 Character: 21
    + Grant-SPObjectSecurity $ metadataServiceAppSecurity -Principa …
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo: InvalidArgument: (Microsoft.Share … tObjectSecurity: SPCmdletGrantObjectSecurity) [Grant
    SPObjectSecurity] SPException
    + FullyQualifiedErrorId: Microsoft.SharePoint.PowerShell.SPCmdletGrantObjectSecurity

    ————————————————– ————
    – Script halted!
    – Error provisioning the Managed Metadata Service Application
    Press any key to exit …

    Like

    • Hi Joe,
      It’s all depend your configuration of Managed Service accounts.
      You can use one service account for one portal web application and one service account for My Site Web Application or you can use only one service account for both or all web applications.
      In my above example in step 3, I have use one service account (Domain\SP_Portal) for portal web application and one service account (Domain\SP_MySite) for My Site web app.
      Each web app have each separate service account is Microsoft’s recommend practice.

      Like

      • You are right because of the Portal access permission is not given for the MySite’ Service account user. If there are different service accounts for Portal and MySite web app, then you only have to grant permission on Portal web app for MySite’s service account user then you will be able to post pictures to newsfeeds and tag.

        Like

      • I’m not sure what the point would be to having different service accounts when you have to modify the security policy on each of the web apps to allow the other accounts full control. For example, the portal web app needs a user policy for the mysite app pool to allow tagging and the mysite web app needs a user policy for the portal app pool to allow posting pictures. This does work (I just tested it) but what is the point? It would be much simpler to use the same service account for all web apps.

        Liked by 1 person

      • Hey Joe,
        They should share the same app pool and service account, unless there are explicit security requirements to isolate them. you will get better performance if you host them in the same app pool and therefore account
        Thanks.

        Like

  2. I am not certain where I am making mistake. My installation always stop at creation of User Profile application. Then I create UPA manualy and continue installation using script. I just do not have ide where is my mistake. Any ideas?

    Like

  3. I tried, but I have some problems with communication between servers.
    And secondly I have not managed to configure the user profile services.
    I had to configure it manually. And I have an error in my “mysite” type ” We’re sorry. Something went wrong with your My Site setup”
    Any Idea?

    Like

  4. I just used this script and got the following error message and I’ve googled it but nothing came up.. Can you please help me..

    – Enabling WSManCredSSP for “HIS-SPDEVFE1”
    ————————————————————–
    – Server: HIS-SPDEVFE1
    – Testing connection (via Ping) to “HIS-SPDEVFE1″…Success.
    – Updating PowerShell execution policy on “HIS-SPDEVFE1” via PsExec…

    PsExec v2.11 – Execute processes remotely
    Copyright (C) 2001-2014 Mark Russinovich
    Sysinternals – http://www.sysinternals.com

    powershell.exe exited on HIS-SPDEVFE1 with error code -1.
    – Enabling PowerShell remoting on “HIS-SPDEVFE1” via PsExec…

    PsExec v2.11 – Execute processes remotely
    Copyright (C) 2001-2014 Mark Russinovich
    Sysinternals – http://www.sysinternals.com

    D:\SP\AutoSPInstaller\AutoSPInstallerConfigureRemoteTarget.ps1 : The term
    ‘D:\SP\AutoSPInstaller\AutoSPInstallerConfigureRemoteTarget.ps1’ is not recognized as the name of a cmdlet, function,
    script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is
    correct and try again.
    At line:1 char:1
    + D:\SP\AutoSPInstaller\AutoSPInstallerConfigureRemoteTarget.ps1
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : ObjectNotFound: (D:\SP\AutoSPIns…emoteTarget.ps1:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

    powershell.exe exited on HIS-SPDEVFE1 with error code 1.
    – Starting remote session to HIS-SPDEVFE1…
    New-PSSession : [HIS-SPDEVFE1] Connecting to remote server HIS-SPDEVFE1 failed with the following error message : The
    WinRM client cannot process the request. The authentication mechanism requested by the client is not supported by the
    server or unencrypted traffic is disabled in the service configuration. Verify the unencrypted traffic setting in the
    service configuration or specify one of the authentication mechanisms supported by the server. To use Kerberos,
    specify the computer name as the remote destination. Also verify that the client computer and the destination computer
    are joined to a domain. To use Basic, specify the computer name as the remote destination, specify Basic
    authentication and provide user name and password. Possible authentication mechanisms reported by server:
    Negotiate Kerberos For more information, see the about_Remote_Troubleshooting Help topic.
    At D:\SP\AutoSPInstaller\AutoSPInstallerFunctions.ps1:6245 char:20
    + $session = New-PSSession -Name “AutoSPInstallerSession-$server” -Authent …
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : OpenError: (System.Manageme….RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
    gTransportException
    + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    ————————————————————–
    – Script halted!

    Exception : System.Management.Automation.ParameterBindingValidationException: Cannot validate argument on
    parameter ‘Session’. The argument is null or empty. Provide an argument that is not null or
    empty, and then try the command again. —>
    System.Management.Automation.ValidationMetadataException: The argument is null or empty.
    Provide an argument that is not null or empty, and then try the command again.
    at System.Management.Automation.ValidateNotNullOrEmptyAttribute.Validate(Object arguments,
    EngineIntrinsics engineIntrinsics)
    at System.Management.Automation.ParameterBinderBase.BindParameter(CommandParameterInternal
    parameter, CompiledCommandParameter parameterMetadata, ParameterBindingFlags flags)
    — End of inner exception stack trace —
    at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext
    funcContext, Exception exception)
    at System.Management.Automation.Interpreter.ActionCallInstruction`2.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    TargetObject :
    CategoryInfo : InvalidData: (:) [Invoke-Command], ParameterBindingValidationException
    FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.InvokeCommandCommand
    ErrorDetails :
    InvocationInfo : System.Management.Automation.InvocationInfo
    ScriptStackTrace : at Install-NetFramework, D:\SP\AutoSPInstaller\AutoSPInstallerFunctions.ps1: line 6247
    at Install-Remote, D:\SP\AutoSPInstaller\AutoSPInstallerMain.ps1: line 137
    at , D:\SP\AutoSPInstaller\AutoSPInstallerMain.ps1: line 409
    at , : line 1
    PipelineIterationInfo : {}
    PSMessageDetails :

    Like

      • Hi Jacqueline and Nicolas

        When you are installing the SharePoint server on multiple server using AutoSPInstaller, Please use the UNC path to run AutoSPInstaller bat file.

        For example, AutoSPInstaller is configured in “D\SP folder” of SharePoint App Server (SPAPP1).
        Then you have to execute bat file using UNC path “\\SPAPP1\$D\SP\AutoSPInstaller.bat” in run (Windows + R). All will work fine.

        You are getting the error because you are going to run the AutoSPInstaller bat file without using the UNC path and that’s why other servers does not know the path (“D:\SP\AutoSPInstaller\”).

        It might be helpful,
        Thank you.

        Like

  5. Pingback: SharePoint 2010/2013 Single-Multi Server Installation using AutoSPInstaller | SharePoint Interests

  6. I get the following error:

    – Done with HOSTS file.
    ————————————————————–
    ————————————————————–
    – Provisioning State Service Application…
    – Creating State Service Application Proxy…
    – Done creating State Service Application.
    ————————————————————–
    ————————————————————–
    – Provisioning Managed Metadata Service Application
    – Managed Account domain\SP_Services not found
    At C:\Users\********\Desktop\SP\AutoSPInstaller\AutoSPInstallerFunctions.ps1:2102 char:41
    + If ($managedAccountGen -eq $null) { Throw ” – Managed Account $($spservice.u …
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : OperationStopped: ( – Managed Acco…vices not found:String) [], RuntimeException
    + FullyQualifiedErrorId : – Managed Account domain\SP_Services not found

    ————————————————————–
    – Script halted!
    – Error provisioning the Managed Metadata Service Application

    I’ve googled it but nothing relevant came out.
    The domain\SP_Services is created.
    Any idea ?

    Like

  7. Thank you so much, if I want to have dedicated search server and changing default search topology, is that better to configure search by AutoSPInstallerGUI or should I leave it and after installing SharePoint using powershell for that?

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s